Caterpillar 336E & 336E L 345-0374: GAUGE GP-OIL LEVEL (DIPSTICK) Parts — Archive section 69
Caterpillar 336E & 336E L 345-0374: GAUGE GP-OIL LEVEL (DIPSTICK): 18 original catalog entries from the Caterpillar 336E & 336E L · C9.3 ENGINE · SIS SEBP5672 configuration.
Equipment and Catalog Identification
Equipment catalog configuration: Caterpillar 336E & 336E L · C9.3 ENGINE · SIS SEBP5672. Application: 336E & 336E L Excavator · Machine serial CMR00001-UP · SEBP5672. Original section: 345-0374: GAUGE GP-OIL LEVEL (DIPSTICK). Verified equipment catalog identity: https://avspare.com/caterpillar/sebp5672/; archive section 69; archive listing page 6. The verified equipment catalog identifies the engine model as C9.3. Caterpillar parts documentation identifies the branded C9.3 engine model; this does not establish interchangeability with other equipment or engine revisions. Engine serial range is not supplied. These selected sections cover original complete/core engine arrangements, engine and CEM module installation, engine components, mounting, oil-filter routing, drains and fumes disposal. Separate original cover, cylinder-head, piston, flywheel, gasket-kit, fan-drive and oil-level-gauge versions remain separate, including sections without supplied drawings. Fuel-tank and refrigeration/compressor references remain in their original engine-installation and machine context; they do not establish standalone engine fitment. This is not the entire machine parts book. Retain every arrangement, serial/date applicability and original note; this is not the entire machine parts book. Check machine and engine nameplates, arrangement numbers, serial ranges and original notes before ordering. This section does not establish interchangeability with other configurations.
Illustrations | Parts table | Request a quote
345-0374: GAUGE GP-OIL LEVEL (DIPSTICK) Illustrations
Original Caterpillar Parts List
The original part number is retained. Common Caterpillar Number is the same recognized number with its hyphen removed, for example 3N-2886 → 3N2886. Letters, digits and leading zeros remain unchanged. This is a spelling variant, not a substitute part or fitment guarantee. Unrecognized formats are marked for verification. Original quantities and notes apply; quantities do not indicate stock. An em dash represents an empty source field. Archive references are retained as source references.
| Ref. | Original Part Number | Common Caterpillar Number | Catalog Qty. | Original Description | Original Catalog Notes | Enquiry |
|---|---|---|---|---|---|---|
| 1. | 1S-2563 | 1S2563 | [1] | PLUG | — | Request a Quote |
| 2. | 6V-5839 | 6V5839 | [1] | WASHER (11X21X2.5-MM THK) | — | Request a Quote |
| 3. | 476-5483 C | Not derived — verify | [1] | BRACKET AS | — | Ask for identification |
| — | 8T-3490 M | Not derived — verify | [4] | NUT-WELD (M10X1.5-THD) | — | Ask for identification |
| 4. | 436-1393 C | Not derived — verify | [1] | GAUGE AS-OIL LEVEL (DIPSTICK) (ENGINE) | — | Ask for identification |
| — | 469-6309 | 4696309 | [1] | TUBE AS-OIL GAUGE | — | Request a Quote |
| — | 474-3235 | 4743235 | [1] | GAUGE-OIL LEVEL (DIPSTICK) (ENGINE) | — | Request a Quote |
| 5. | 8E-9571 | 8E9571 | [1] | WASHER-HARD (8.8X16X7-MM THK) | — | Request a Quote |
| 6. | 8S-8820 C | Not derived — verify | [1] | CLIP | — | Ask for identification |
| 7. | 344-5674 CM | Not derived — verify | [2] | NUT (M8X1.25-THD) | — | Ask for identification |
| 8. | 5P-4116 | 5P4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | — | Request a Quote |
| 9. | 5P-8245 | 5P8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | — | Request a Quote |
| 10. | 6A-5591 M | Not derived — verify | [1] | BOLT (M12X1.75X25-MM) | — | Ask for identification |
| 11. | 6V-1820 M | Not derived — verify | [1] | BOLT (M10X1.5X30-MM) | — | Ask for identification |
| 12. | 8T-1888 C | Not derived — verify | [1] | CLIP (TAB) | — | Ask for identification |
| 13. | 8T-1887 C | Not derived — verify | [1] | CLIP (SLOT) | — | Ask for identification |
| 14. | 5P-1076 | 5P1076 | [1] | WASHER-HARD (13.5X30X4-MM THK) | — | Request a Quote |
| 15. | 2Y-5829 M | Not derived — verify | [1] | NUT (M10X1.5-THD) | — | Ask for identification |
Request a Quote from WinsDiesel
Send the original part number, required quantity, machine serial number, engine nameplate/model and serial number, arrangement number, application, component photos and delivery country. Supplied contents, specification, availability and lead time will be confirmed in the quotation.
Send an enquiry or email winsparts@winsparts.com.
Related Caterpillar Catalog Sections
- Caterpillar 336E & 336E L 345-0374: GAUGE GP-OIL LEVEL (DIPSTICK) Parts
- Caterpillar 336E & 336E L 345-0374: GAUGE GP-OIL LEVEL (DIPSTICK) Parts — Archive section 70
- Caterpillar 336E & 336E L 452-0226: FUMES DISPOSAL GP Parts
Browse this Caterpillar 336E & 336E L 336E & 336E L Excavator · Machine serial CMR00001-UP · SEBP5672 catalog | All Caterpillar catalogs | All equipment and engine catalogs
