Caterpillar 3512 Industrial 8N-9639 GUARD GP-DAMPER Parts
Caterpillar 3512 8N-9639 GUARD GP-DAMPER: 30 catalog entries transcribed from the supplied original PDF from the 3512 Industrial Engine · 65Z887-UP (Engine) configuration.
Engine and Catalog Identification
Source configuration: 3512 Industrial Engine · 65Z887-UP (Engine). Application: Industrial. Reviewed chapter: 8N-9639 GUARD GP-DAMPER. Archive index label: 8N-9639 GUARD GP-DAMPER. The supplied archive identifies its source as CATERPILLAR 3512 INDUSTRIAL ENGINE.pdf; source page 245. Check the full engine serial number, arrangement number, application and original notes before ordering. This section does not establish interchangeability with other configurations.
Original PDF Assembly Scope and Conditions
Original PDF physical page 245: 8N-9639 GUARD GP-DAMPER S/N: 65Z887-1497 FOR USE WITH FRONT ACCESSORY DRIVE HOUSING AN ATTACHMENT.
Original PDF physical page 246: 8N-9639 GUARD GP-DAMPER S/N: 65Z1498-UP FOR USE WITH FRONT ACCESSORY DRIVE HOUSING AN ATTACHMENT.
The parts table retains the separate source assembly for each entry. Drawings retain their own original assembly headings and may show a narrower component scope. Original part numbers, conditions, graphic references, product levels and note flags apply; no interchangeability is implied.
Illustrations | Parts table | Request a quote
8N-9639 GUARD GP-DAMPER Illustrations
Original Caterpillar Parts List
The original part number is retained. Common Caterpillar Number is the same recognized number with its hyphen removed, for example 3N-2886 → 3N2886. Letters, digits and leading zeros remain unchanged. This is a spelling variant, not a substitute part or fitment guarantee. Unrecognized formats are marked for verification. Original quantities and notes apply; quantities do not indicate stock. An em dash represents an empty source field. Original manual page references are retained as source references.
| Ref. | Original Part Number | Common Caterpillar Number | Catalog Qty. | Original Description | Original Catalog Notes | Enquiry |
|---|---|---|---|---|---|---|
| 1 | 1W-4923 | 1W4923 | 1 | DAMPER & GUARD AS | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| — | 1V-8638 | 1V8638 | 6 | NUT (3/8-16-THD) | Graphic ref.: 1; Product level: 2; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 2 | 8J-8919 | 8J8919 | 1 | COVER | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 3 | 0S-1621 | 0S1621 | 8 | BOLT (1/2-13X1-IN) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 4 | 5P-8245 | 5P8245 | 8 | WASHER-HARD (13.5X25.5X3-MM THK) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 5 | 030-8535 | 0308535 | 6 | BOLT-LOCKING (3/8-16X0.875-IN) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 6 | 5P-1075 | 5P1075 | 6 | WASHER-HARD (10.2X22.5X3-MM THK) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 7 | 7W-3031 | 7W3031 | 2 | BRACKET | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 8 | 7W-3032 | 7W3032 | 2 | BRACKET | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 9 | 1P-7115 | 1P7115 | 4 | GROMMET AS | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 10 | 0S-1591 | 0S1591 | 4 | BOLT (3/8-16X1.5-IN) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 11 | 9S-8752 | 9S8752 | 4 | NUT-FULL (3/8-16-THD) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 12 | 3F-1417 | 3F1417 | 4 | WASHER (10.3X30.2X3-MM THK) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 13 | 5M-2894 | 5M2894 | 4 | WASHER-HARD (10.2X18.5X2.5-MM THK) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 14 | 9L-9132 | 9L9132 | 4 | WASHER (10.2X25.5X2.5-MM THK) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 1 | 1W-4923 | 1W4923 | 1 | DAMPER & GUARD AS | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| — | 1V-8638 | 1V8638 | 6 | NUT (3/8-16-THD) | Graphic ref.: 1; Product level: 2; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 2 | 8J-8919 | 8J8919 | 1 | COVER | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 3 | 351-2245 | 3512245 | 8 | BOLT-SPECIAL (1/2-13X2-IN) | Original note flags: C; Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 4 | 5P-8245 | 5P8245 | 8 | WASHER-HARD (13.5X25.5X3-MM THK) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 5 | 030-8535 | 0308535 | 6 | BOLT-LOCKING (3/8-16X0.875-IN) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 6 | 5P-1075 | 5P1075 | 6 | WASHER-HARD (10.2X22.5X3-MM THK) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 7 | 351-9005 | 3519005 | 2 | BRACKET AS | Original note flags: C; Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 8 | 351-9004 | 3519004 | 2 | BRACKET AS | Original note flags: C; Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 9 | 1P-7115 | 1P7115 | 4 | GROMMET AS | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 10 | 0S-1591 | 0S1591 | 4 | BOLT (3/8-16X1.5-IN) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 11 | 9S-8752 | 9S8752 | 4 | NUT-FULL (3/8-16-THD) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 12 | 3F-1417 | 3F1417 | 4 | WASHER (10.3X30.2X3-MM THK) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 13 | 5M-2894 | 5M2894 | 4 | WASHER-HARD (10.2X18.5X2.5-MM THK) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
| 14 | 9L-9132 | 9L9132 | 4 | WASHER (10.2X25.5X2.5-MM THK) | Graphic ref.: 1; Product level: 1; Source PDF section: 8N-9639 GUARD GP-DAMPER | Request a Quote |
Original PDF Table Notes
C - CHANGE FROM PREVIOUS TYPE
Request a Quote from WinsDiesel
Send the original part number, required quantity, Caterpillar 3512 engine serial number, arrangement number, application, component photos and delivery country. Supplied contents, specification, availability and lead time will be confirmed in the quotation.
Send an enquiry or email winsparts@winsparts.com.
Related Caterpillar Catalog Sections
- Caterpillar 3512 Industrial 7W-6669 GUARD GP-DAMPER Parts
- Caterpillar 3512 Industrial 102-3540 HOUSING GP-FLYWHEEL Parts
- Caterpillar 3512 Industrial 6I-3143 GUARD GP-DAMPER Parts
Browse this Caterpillar 3512 Industrial catalog | All Caterpillar catalogs | All engine brands
