Caterpillar 330D L 252-8439: CYLINDER HEAD GP Parts — Archive section 22
Caterpillar 330D L 252-8439: CYLINDER HEAD GP: 30 original catalog entries from the Caterpillar 330D L · C9 ENGINE · SIS SEBP5206 configuration.
Equipment and Catalog Identification
Equipment catalog configuration: Caterpillar 330D L · C9 ENGINE · SIS SEBP5206. Application: 330D L Excavator · Machine serial MAG00001-UP · SEBP5206. Original section: 252-8439: CYLINDER HEAD GP. Verified equipment catalog identity: https://avspare.com/caterpillar/sebp5206/; archive section 22; archive listing page 2. The verified equipment catalog identifies the engine model as C9. Caterpillar parts documentation identifies the branded C9 engine model; this does not establish interchangeability with other equipment or engine revisions. Engine serial range is not supplied. These selected sections cover engine arrangements and core, installation, internal components, covers, crankshaft, cylinder-block and cylinder-head versions, fan drive, flywheel, front gears and housings, fasteners, and gasket/seal kits. The equipment-wide chassis and general arrangements are excluded. Cold-weather arrangements retain the original jacket-water heater, cold-start and auxiliary jump-start wiring context. Engine installation references to refrigerant compressors, condensers and combined radiator/hydraulic-oil cooling, mounting, filter routing and drain routing are retained in their original machine context; they do not establish standalone engine fitment. Original cylinder-head, damper, fan-drive, piston-and-rod and valve-mechanism versions remain separate with all original notes. Engine mounting, filter routing and installation retain equipment context; check original arrangements and notes rather than assuming standalone engine fitment. Retain every arrangement, serial/date applicability and original note; this is not the entire machine parts book. Check machine and engine nameplates, arrangement numbers, serial ranges and original notes before ordering. This section does not establish interchangeability with other configurations.
Illustrations | Parts table | Request a quote
252-8439: CYLINDER HEAD GP Illustrations
Original Caterpillar Parts List
The original part number is retained. Common Caterpillar Number is the same recognized number with its hyphen removed, for example 3N-2886 → 3N2886. Letters, digits and leading zeros remain unchanged. This is a spelling variant, not a substitute part or fitment guarantee. Unrecognized formats are marked for verification. Original quantities and notes apply; quantities do not indicate stock. An em dash represents an empty source field. Archive references are retained as source references.
| Ref. | Original Part Number | Common Caterpillar Number | Catalog Qty. | Original Description | Original Catalog Notes | Enquiry |
|---|---|---|---|---|---|---|
| 1. | 1W-2715 | 1W2715 | [24] | LOCK-RETAINER | — | Request a Quote |
| 2. | 2A-4429 | 2A4429 | [24] | LOCK-RETAINER | — | Request a Quote |
| 3. | 260-4856 | 2604856 | [12] | GUIDE-VALVE | — | Request a Quote |
| — | 203-3237 AB | Not derived — verify | [12] | GUIDE-VALVE (0.13-MM OVERSIZE OD) | — | Ask for identification |
| — | 203-3238 AB | Not derived — verify | [12] | GUIDE-VALVE (0.5 OVERSIZE OD) | — | Ask for identification |
| 4. | 163-2478 | 1632478 | [12] | SEAL-VALVE STEM | — | Request a Quote |
| 5. | 183-3407 | 1833407 | [6] | PLUG AS | — | Request a Quote |
| — | 9S-8004 | 9S8004 | [1] | PLUG-O-RING | — | Request a Quote |
| — | 153-4906 | 1534906 | [1] | SEAL-O-RING | — | Request a Quote |
| 6. | 271-7442 | 2717442 | [2] | PLUG (HEX HEAD) | — | Request a Quote |
| 7. | 183-2317 | 1832317 | [2] | SEAL-O-RING | — | Request a Quote |
| 8. | 190-6115 | 1906115 | [12] | SPRING-VALVE (INNER) | — | Request a Quote |
| 9. | 190-6117 | 1906117 | [12] | SPRING-VALVE (OUTER) | — | Request a Quote |
| 10. | 211-2134 | 2112134 | [12] | RETAINER (VALVE SPRING) | — | Request a Quote |
| 11. | 217-0609 | 2170609 | [6] | SEAT-VALVE SPRING | — | Request a Quote |
| 12. | 241-8382 | 2418382 | [12] | VALVE-INLET | — | Request a Quote |
| 13. | 241-8383 | 2418383 | [12] | VALVE-EXHAUST | — | Request a Quote |
| 14. | 241-8384 | 2418384 | [12] | RETAINER (VALVE SPRING) | — | Request a Quote |
| 15. | 241-8385 | 2418385 | [12] | SPRING-VALVE (OUTER) | — | Request a Quote |
| 16. | 241-8386 | 2418386 | [12] | SPRING-VALVE (INNER) | — | Request a Quote |
| 17. | 241-8387 | 2418387 | [6] | SEAT | — | Request a Quote |
| 18. | 259-5829 | 2595829 | [12] | GUIDE-VALVE | — | Request a Quote |
| — | 254-3941 AB | Not derived — verify | [12] | GUIDE-VALVE (0.13-MM OVERSIZE OD) | — | Ask for identification |
| — | 254-3942 AB | Not derived — verify | [12] | GUIDE-VALVE (0.5 OVERSIZE OD) | — | Ask for identification |
| 19. | 241-8390 | 2418390 | [12] | SEAL-VALVE STEM | — | Request a Quote |
| 20. | 311-7229 CY | Not derived — verify | [1] | CYLINDER HEAD AS | — | Ask for identification |
| 21. | 148-8395 | 1488395 | [2] | PLUG AS | — | Request a Quote |
| — | 3K-0360 | 3K0360 | [1] | SEAL-O-RING | — | Request a Quote |
| — | 9S-8005 | 9S8005 | [1] | PLUG-O-RING (HEX HEAD) | — | Request a Quote |
| 22. | 8T-6764 | 8T6764 | [2] | PLUG-PIPE | — | Request a Quote |
Request a Quote from WinsDiesel
Send the original part number, required quantity, machine serial number, engine nameplate/model and serial number, arrangement number, application, component photos and delivery country. Supplied contents, specification, availability and lead time will be confirmed in the quotation.
Send an enquiry or email winsparts@winsparts.com.
Related Caterpillar Catalog Sections
- Caterpillar 330D L 252-8439: CYLINDER HEAD GP Parts
- Caterpillar 330D L 165-4557: DAMPER & PULLEY GP Parts
- Caterpillar 330D L 242-0672: CYLINDER HEAD GP Parts
Browse this Caterpillar 330D L 330D L Excavator · Machine serial MAG00001-UP · SEBP5206 catalog | All Caterpillar catalogs | All equipment and engine catalogs
