Caterpillar 336E & 336E L 310-9640: MOUNTING GP-ENGINE Parts
Caterpillar 336E & 336E L 310-9640: MOUNTING GP-ENGINE: 21 original catalog entries from the Caterpillar 336E & 336E L · C9.3 ENGINE · SIS SEBP5672 configuration.
Equipment and Catalog Identification
Equipment catalog configuration: Caterpillar 336E & 336E L · C9.3 ENGINE · SIS SEBP5672. Application: 336E & 336E L Excavator · Machine serial CMR00001-UP · SEBP5672. Original section: 310-9640: MOUNTING GP-ENGINE. Verified equipment catalog identity: https://avspare.com/caterpillar/sebp5672/; archive section 46; archive listing page 4. The verified equipment catalog identifies the engine model as C9.3. Caterpillar parts documentation identifies the branded C9.3 engine model; this does not establish interchangeability with other equipment or engine revisions. Engine serial range is not supplied. These selected sections cover original complete/core engine arrangements, engine and CEM module installation, engine components, mounting, oil-filter routing, drains and fumes disposal. Separate original cover, cylinder-head, piston, flywheel, gasket-kit, fan-drive and oil-level-gauge versions remain separate, including sections without supplied drawings. Fuel-tank and refrigeration/compressor references remain in their original engine-installation and machine context; they do not establish standalone engine fitment. This is not the entire machine parts book. Retain every arrangement, serial/date applicability and original note; this is not the entire machine parts book. Check machine and engine nameplates, arrangement numbers, serial ranges and original notes before ordering. This section does not establish interchangeability with other configurations.
Illustrations | Parts table | Request a quote
310-9640: MOUNTING GP-ENGINE Illustrations
Original Caterpillar Parts List
The original part number is retained. Common Caterpillar Number is the same recognized number with its hyphen removed, for example 3N-2886 → 3N2886. Letters, digits and leading zeros remain unchanged. This is a spelling variant, not a substitute part or fitment guarantee. Unrecognized formats are marked for verification. Original quantities and notes apply; quantities do not indicate stock. An em dash represents an empty source field. Archive references are retained as source references.
| Ref. | Original Part Number | Common Caterpillar Number | Catalog Qty. | Original Description | Original Catalog Notes | Enquiry |
|---|---|---|---|---|---|---|
| 1. | 109-9329 | 1099329 | [2] | WASHER (21.5X120X8-MM THK) | — | Request a Quote |
| 2. | 109-9437 | 1099437 | [2] | WASHER (24.5X135X12-MM THK) | — | Request a Quote |
| 3. | 118-9930 | 1189930 | [1] | SUPPORT AS | — | Request a Quote |
| — | 451-2184 M | Not derived — verify | [1] | NUT (M20X2.5-THD) | — | Ask for identification |
| 4. | 139-8736 | 1398736 | [2] | MOUNT-FLEXIBLE (LOWER) | — | Request a Quote |
| 5. | 139-8737 | 1398737 | [2] | MOUNT-FLEXIBLE (UPPER) | — | Request a Quote |
| 6. | 139-8873 M | Not derived — verify | [2] | SUPPORT AS | — | Ask for identification |
| — | 451-2185 M | Not derived — verify | [1] | NUT (M24X3-THD) | — | Ask for identification |
| 7. | 266-6298 | 2666298 | [2] | MOUNT-RUBBER (LOWER) | — | Request a Quote |
| 8. | 266-6299 | 2666299 | [2] | MOUNT-RUBBER (UPPER) | — | Request a Quote |
| 9. | 368-6679 | 3686679 | [1] | SUPPORT AS | — | Request a Quote |
| — | 451-2184 M | Not derived — verify | [1] | NUT (M20X2.5-THD) | — | Ask for identification |
| 10. | 324-4394 | 3244394 | [1] | BRACKET AS | — | Request a Quote |
| 11. | 324-4397 | 3244397 | [1] | BRACKET AS | — | Request a Quote |
| 12. | 447-1712 M | Not derived — verify | [2] | BOLT (M20X2.5X130-MM) | — | Ask for identification |
| 13. | 447-1721 M | Not derived — verify | [2] | BOLT (M24X3X160-MM) | — | Ask for identification |
| 14. | 451-2188 | 4512188 | [2] | WASHER-HARD (26X50X8-MM THK) | — | Request a Quote |
| 15. | 451-2176 | 4512176 | [4] | WASHER-HARD (22X35X3.5-MM THK) | — | Request a Quote |
| 16. | 451-2177 | 4512177 | [2] | WASHER-HARD (26X44X4-MM THK) | — | Request a Quote |
| 17. | 447-1709 M | Not derived — verify | [8] | BOLT (M16X2X45-MM) | — | Ask for identification |
| 18. | 451-2175 | 4512175 | [8] | WASHER-HARD (17.5X30X3.5-MM THK) | — | Request a Quote |
Request a Quote from WinsDiesel
Send the original part number, required quantity, machine serial number, engine nameplate/model and serial number, arrangement number, application, component photos and delivery country. Supplied contents, specification, availability and lead time will be confirmed in the quotation.
Send an enquiry or email winsparts@winsparts.com.
Related Caterpillar Catalog Sections
- Caterpillar 336E & 336E L 344-0368: MOUNTING GP-ALTERNATOR & COMPR Parts
- Caterpillar 336E & 336E L 348-8371: PAN GP-OIL Parts
- Caterpillar 336E & 336E L 355-7364: LIFTING GP-ENGINE Parts — Archive section 44
Browse this Caterpillar 336E & 336E L 336E & 336E L Excavator · Machine serial CMR00001-UP · SEBP5672 catalog | All Caterpillar catalogs | All equipment and engine catalogs
