Caterpillar 3512 Industrial 4W-0095 CYLINDER HEAD GP Parts — Source page 162
Caterpillar 3512 4W-0095 CYLINDER HEAD GP: 28 catalog entries transcribed from the supplied original PDF from the 3512 Industrial Engine · 65Z887-UP (Engine) configuration.
Engine and Catalog Identification
Source configuration: 3512 Industrial Engine · 65Z887-UP (Engine). Application: Industrial. Reviewed chapter: 4W-0095 CYLINDER HEAD GP. Archive index label: 4W-0095 CYLINDER HEAD GP. The supplied archive identifies its source as CATERPILLAR 3512 INDUSTRIAL ENGINE.pdf; source page 162. Check the full engine serial number, arrangement number, application and original notes before ordering. This section does not establish interchangeability with other configurations.
Original PDF Assembly Scope and Conditions
Original PDF physical page 162: 4W-0095 CYLINDER HEAD GP S/N: 65Z887-960.
Original PDF physical page 163: 4W-0095 CYLINDER HEAD GP S/N: 65Z961-1129.
The parts table retains the separate source assembly for each entry. Drawings retain their own original assembly headings and may show a narrower component scope. Original part numbers, conditions, graphic references, product levels and note flags apply; no interchangeability is implied.
Illustrations | Parts table | Request a quote
4W-0095 CYLINDER HEAD GP Illustrations
Original Caterpillar Parts List
The original part number is retained. Common Caterpillar Number is the same recognized number with its hyphen removed, for example 3N-2886 → 3N2886. Letters, digits and leading zeros remain unchanged. This is a spelling variant, not a substitute part or fitment guarantee. Unrecognized formats are marked for verification. Original quantities and notes apply; quantities do not indicate stock. An em dash represents an empty source field. Original manual page references are retained as source references.
| Ref. | Original Part Number | Common Caterpillar Number | Catalog Qty. | Original Description | Original Catalog Notes | Enquiry |
|---|---|---|---|---|---|---|
| 1 | 5B-7890 | 5B7890 | 1 | PLUG-PIPE | Original note flags: B; Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 2 | 4W-9560 | 4W9560 | 1 | CYLINDER HEAD GP | Original note flags: YR; Graphic ref.: 1; Product level: 1; See original manual page: 134; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 3 | 131-0420 | 1310420 | 6 | FASTENER GP-CYLINDER HEAD (EACH INCLUDES) | Original note flags: C; Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| — | 5P-8248 | 5P8248 | 1 | WASHER-HARD (20X36.5X3.5-MM THK) | Graphic ref.: 1; Product level: 2; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| — | 7N-1961 | 7N1961 | 1 | BOLT-12 POINT HEAD (3/4-16X8.5-IN) | Graphic ref.: 1; Product level: 2; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 4 | 131-0421 | 1310421 | 2 | FASTENER GP-CYLINDER HEAD (EACH INCLUDES) | Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| — | 5P-8248 | 5P8248 | 1 | WASHER-HARD (20X36.5X3.5-MM THK) | Graphic ref.: 1; Product level: 2; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| — | 7N-1961 | 7N1961 | 1 | BOLT-12 POINT HEAD (3/4-16X8.5-IN) | Graphic ref.: 1; Product level: 2; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| — | 9Y-0635 | 9Y0635 | 1 | SPACER (19.35X30.18X45-MM THK) | Graphic ref.: 1; Product level: 2; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 6 | 5B-0213 | 5B0213 | 2 | BOLT (3/8-16X2.375-IN) | Original note flags: C; Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 7 | 5M-2894 | 5M2894 | 2 | WASHER-HARD (10.2X18.5X2.5-MM THK) | Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 8 | 110-6991 | 1106991 | 1 | GASKET-CYLINDER HEAD | Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 9 | 126-1113 | 1261113 | 4 | SEAL | Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 10 | 126-1112 | 1261112 | 4 | SEAL | Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 1 | 5B-7890 | 5B7890 | 1 | PLUG-PIPE | Original note flags: B; Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 2 | 172-0835 | 1720835 | 1 | CYLINDER HEAD GP | Original note flags: CYR; Graphic ref.: 1; Product level: 1; See original manual page: 105; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 3 | 131-0420 | 1310420 | 6 | FASTENER GP-CYLINDER HEAD (EACH INCLUDES) | Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| — | 7N-1961 | 7N1961 | 1 | BOLT-12 POINT HEAD (3/4-16X8.5-IN) | Graphic ref.: 1; Product level: 2; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| — | 187-7738 | 1877738 | 1 | WASHER-HARD (21X36.5X3.5-MM THK) | Graphic ref.: 1; Product level: 2; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 4 | 131-0421 | 1310421 | 2 | FASTENER GP-CYLINDER HEAD (EACH INCLUDES) | Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| — | 7N-1961 | 7N1961 | 1 | BOLT-12 POINT HEAD (3/4-16X8.5-IN) | Graphic ref.: 1; Product level: 2; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| — | 9Y-0635 | 9Y0635 | 1 | SPACER (19.35X30.18X45-MM THK) | Graphic ref.: 1; Product level: 2; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| — | 187-7738 | 1877738 | 1 | WASHER-HARD (21X36.5X3.5-MM THK) | Graphic ref.: 1; Product level: 2; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 5 | 204-5426 | 2045426 | 4 | SEAL (WATER) | Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 6 | 5B-0213 | 5B0213 | 2 | BOLT (3/8-16X2.375-IN) | Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 7 | 5M-2894 | 5M2894 | 2 | WASHER-HARD (10.2X18.5X2.5-MM THK) | Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 8 | 110-6991 | 1106991 | 1 | GASKET-CYLINDER HEAD | Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
| 9 | 204-5427 | 2045427 | 4 | SEAL (WATER) | Graphic ref.: 1; Product level: 1; Source PDF section: 4W-0095 CYLINDER HEAD GP | Request a Quote |
Original PDF Table Notes
B - USE AS REQUIRED C - CHANGE FROM PREVIOUS TYPE R - REMANUFACTURED PART MAY BE AVAILABLE Y - SEPARATE ILLUSTRATION
B - USE AS REQUIRED C - CHANGE FROM PREVIOUS TYPE R - REMANUFACTURED PART MAY BE AVAILABLE Y - SEPARATE ILLUSTRATION
Request a Quote from WinsDiesel
Send the original part number, required quantity, Caterpillar 3512 engine serial number, arrangement number, application, component photos and delivery country. Supplied contents, specification, availability and lead time will be confirmed in the quotation.
Send an enquiry or email winsparts@winsparts.com.
Related Caterpillar Catalog Sections
- Caterpillar 3512 Industrial 4P-9122 CYLINDER HEAD GP Parts
- Caterpillar 3512 Industrial 350-5205 CYLINDER HEAD GP Parts — Source page 159
- Caterpillar 3512 Industrial 100-4325 DAMPER GP Parts
Browse this Caterpillar 3512 Industrial catalog | All Caterpillar catalogs | All engine brands
